2 in 1 Wireless bluetooth 5.0 Adapter Receiver Audio Support AptX bluetooth Transmit
Special Note:
1: When the battery voltage is lower than 3.1V, it will automatically shut down.
2: In the case of no paired device, it will automatically shut down after 5 minutes of power on.
3: If you need to use for a long time, you can connect the power cable DC5V, use it while charging, the battery voltage is low or the battery can be used when charging.
4: If you are prompted to enter the pairing password when using TX16, please enter "0000".
Product description:
The TX16 is a bluetooth adapter with fiber optic, 3.5mm bluetooth transmit-receive dual-use one-to-two, which can connect two devices at the same time. When it is used as a bluetooth transmitter, it can be used for mobile phones, walkmans, TV sets. The music on the computer and other devices is transmitted wirelessly to your bluetooth receiver, stereo bluetooth headset, bluetooth speaker and other devices.
When it is used as a receiver, it is used as a bluetooth stereo headset (only need to insert the headphone cable into the 3.5mm interface) or with the speaker and amplifier, the device is connected through the audio cable to realize the wireless signal transmission of the mobile phone or computer to play the audio signal.
The product adopts CSR5.0 module design, and the high-end integrated chip has the characteristics of perfect sound quality and low power consumption. It integrates the function of Bluetooth audio transmission and is compatible with all electronic products on the market. It also solves such as XOBX game console-PS4. - Smart TV and other products only have problems with the output of the light solder.
Note: Please fully charge before using TX6.
Product specifications:
Product Name: TX16
bluetooth version: V5.0, Class II
bluetooth chip: CSR BC8670
Frequency range: 2.402GHZ-2.480GHZ
bluetooth protocol: RX: A2DP AVRCP TX: A2DP
Launch mode: Support (connect two bluetooth speakers or headphones at the same time, use a CODEC at the same time)
Receive mode: support (one for two functions, even two mobile phones)
CODEC: Sort TX: respectively: preferred APT-X, second: SBC, third: APTX-LL, fourth: FastStream RX: SBC
APTX use note: APT-X 48KHZ codec is preferred for single connection (APT-X must also be supported for headphones or speakers). If it is dual connection, it will automatically switch SBC CODEC.
Battery specifications: 350MA rechargeable lithium battery
Charging power supply: 110-240V AC Adapter 5VDC" 300ma
Working temperature: -10-55 degrees
Working time: AUX: 15 hours SPDIF: 12 hours
Packing weight: 118g
Product size: 60*60*20mm
Packing size: 160*105*31mm
Packaging accessories:
1:TX16 host *1
2: Optical fiber cable *1
3: Audio cable *1
4: Charging cable *1
5: Instruction manual *1
2 in 1 Wireless bluetooth 5.0 Adapter Receiver Audio Support AptX bluetooth Transmit Buy Now
